CS Position/Motion Control Units
CS Position/Motion Control Units
Counter units gather position information from SSI- or incremental encoders. Actual positions are compared with internally stored target values.Position control Units are used for point-to-point positioning with servo drives or stepper motors. Target data and acceleration/deceleration curves can be adjusted on-the-fly.Position- and motion control Units equipped with MECHATROLINK-II interface can control multiple drives through a single high-speed link. Message routing through mutliple communication layers allows the attached drives to be configured from any point in the control network.
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
August 24, 2023
What to look for in AMR Debug Logs
Discover what key information to look for when debugging AMR systems, and how to interpret the results.
June 16, 2024
How to Configure NTP for CP1L/NX series PLCs
Introduction A NTP (Network Time Protocol) server is a specialized network server that provides accurate time information to connected devices. It synchronizes the clocks of computers and other devices over a network, ensuring that all devices mainta
November 28, 2023
CP and NJ FINS TCP Sample Code
Most models of OMRON PLC support FINS commands, which can allow you to transmit data from one PLC to another. These commands are cross platform compatible, so a CP series PLC can communicate to an NJ series PLC via FINS. The SEND(Send) command allows
November 06, 2024
ZEN Transition Guide
Introduction This article aims to help users transition from the discontinued ZEN relays, to the PLC based alternative using the CP1W-DAM01 LCD option board. This option board can be used with CP1L and CP1H series PLC's (excluding CP1L-L10). The user