RX2

models in this series

High starting torque in open loop: 200% at 0.3 Hz, Full torque at 0 Hz in closed loop
Sensor-less and vector closed-loop control
Triple rating: VLD 110%/1min, LD 120%/1 min and ND 150%/1 min
Built-in EMC filter, logic programming and application functionality
Positioning functionality
Embedded STO safety function (Safety Stop Cat0), SIL3/PLe/CAT 4
Communication options: EtherCAT, PROFIBUS, PROFINET, Modbus TCP
Regenerative solutions as option
CE, CULus, RoHS
Ratings: 200 V class three-phase 0.4 to 55 kW / 400 V three-phase 0.75 to 132 kW

Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery

Models

Models

There are models in this series

Show
Sort by

Accessories

Accessories

There are accessories in this series

Show
Sort by

Downloads

Downloads

Enquire

Enquire

Articles for this series

You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.

February 10, 2023

Using CP1[] Modbus Control For RX2 Inverter Drives

Introduction This document describes the procedure to configure and connect a CP1[] series PLC to an RX2 inverter drive for simple motion control using Modbus RTU. This example is intended for a new CP1/RX2 user and illustrates easy programming and c

January 09, 2024

How to use CX-Drive for back up and monitoring

Introduction CX-Drive is a complementary software that allows users to monitor, program and backup parameters OMRON VSDs and servos. A free copy could be obtained by contacting your OMRON representative.  Starting CX-Drive and going online Start CX-

September 18, 2023

RX2 Inverter Drive Control Input/Output Wiring Configurations

Learn how to correctly configure the wiring inputs and outputs for an RX2 Inverter Drive Control.

November 02, 2023

3G3RX2 Quick Start Guide

CORE SETUP PARAMETERS Motor Nameplate Settings Hb102 - Set motor kW (0.01 to 160 kW) Hb103 - No of Motor Poles, (1500rpm = 4 poles, 3000rpm = 2 poles etc) Hb104 - Base frequency, (Motor Nameplate Freq, 10 to 590 Hz) Hb105 - Maximum frequency (Max Fre

Start a Conversation
This conversation is closed
Uploading...