KM50 Series
KM50 Series
Assist energy saving analysis with built in energy classification functionality.
High precision measurements even for currents below 5% of the nominal value through automatic range switchting.
Able to mesure and distinguished consumed and generated power.
Measurement of reactive power and power factor.
Pulse measurement integrated and direct conversion to measure Energy Management KPI (f.i. n. of pcs / kWh).
No VT required, direct voltage detection / openable CTs
Multi-colored display
Modbus communications
Built-in data logging
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
June 16, 2024
How to Configure NTP for CP1L/NX series PLCs
Introduction A NTP (Network Time Protocol) server is a specialized network server that provides accurate time information to connected devices. It synchronizes the clocks of computers and other devices over a network, ensuring that all devices mainta
February 19, 2024
Connecting a CP1L/H PLC to an NB HMI using a CP1W-EIP61 Option Board
Introduction This guide will show the process of connecting a CP1L or CP1H PLC to an NB HMI using a CP1W-EIP61 option board. Normally the connection of a CP1L or CP1H to an HMI is documented assuming the use of an NS HMI, or a CP1W-CIF41 option board
November 28, 2023
CP and NJ FINS TCP Sample Code
Most models of OMRON PLC support FINS commands, which can allow you to transmit data from one PLC to another. These commands are cross platform compatible, so a CP series PLC can communicate to an NJ series PLC via FINS. The SEND(Send) command allows
November 06, 2024
ZEN Transition Guide
Introduction This article aims to help users transition from the discontinued ZEN relays, to the PLC based alternative using the CP1W-DAM01 LCD option board. This option board can be used with CP1L and CP1H series PLC's (excluding CP1L-L10). The user