FH/FZ Cameras
FH/FZ Cameras
High performance components deliver outstanding performance meeting the toughest requirements
Wide and flexible camera line-up enables you to pick the most suitable hardware for every application – best performance at best value
Highly reliable Camera Link interface
High speed and high-resolution image acquisition
Robust and rugged aluminum housing
Smart algorithms and vision tools make every application robust and reliable - at any speed
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
November 21, 2023
How to firmware update FH/FHV7
The following article describes how to upgrade the firmware for the FH and FHV series cameras. Firmware Updating FH 1. Copy the contents of the firmware file to the root directory of a MicroSD card/USB storage. 2. Insert the storage device to the F
May 26, 2022
Connecting an NJ/NX PLC with a Microscan Camera (MV40)
Introduction This guide is a step-by-step process of connecting an NJ or NX PLC and a Microscan Camera. For this guide, an MV40 camera was used, though all Microscan cameras can be connected with this method. Pre-Requisites Knowledge of Sysmac Studio
November 30, 2023
FH/FHV7 to CJ2 via Ethernet/IP
This article describes how you might connect a FHV camera to a CJ2 PLC via Ethernet/IP. The steps in this article are largely the same when dealing with the FH series camera or other Ethernet/IP compatible PLCs. Configure the Camera Set the Communi
March 06, 2023
Omron Microscan Cameras: How to use Locate Shape and Position Correction
Introduction This guide provides a series of steps that show how to use the Position Correction functionality of Microscan MV Cameras, using AutoVISION. In order to use Position Correction, the Locate Shape functionality must also be used, and is the