E8FC Flow Sensors
E8FC Flow Sensors
Multi-sensing of “Flow rate + temperature” for preventing a sudden stops or manufacturing defects.
Various lineup of replacement adapters to enable easy replacement of your current pressure gauges and flow meters.
Analog current output function in addition to the IO-Link communications function that can perform self-diagnosis of abnormalities in the sensor itself.
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
April 13, 2023
OMRON TM Cobot TCP communication with a NJ/NX PLC
Scenario You need to connect an Omron TM robot to a Omron NX/NJ PLC. This connection is setup using the TCP socket config, where the Cobot sends a string based message to the PLC and receives a response back. Reference documents https://assets.omron.
November 29, 2023
FH/FHV7 to CJ2 via Ethernet/IP
This article describes how you might connect a FHV camera to a CJ2 PLC via Ethernet/IP. The steps in this article are largely the same when dealing with the FH series camera or other Ethernet/IP compatible PLCs. Configure the Camera Set the Communi
February 26, 2024
List of File Extensions for Omron Software
Below is a list of file extensions used by Omron Software ABK CX-Supervisor (older versions / pre-unicode 1.3) Alarm- Error log ADR SYSWIN Text address symbols AHD SYSWIN 1.x/PMD address index file (not used in SYSWIN 3.x) ALG CX-Supervisor (older ve