E2EQ NEXT
E2EQ NEXT
With spatter-resistant coating for application in welding areas
Nearly double the sensing distance of previous
With high-brightness LED, the indicator is visible anywhere from 360°.
Only 10 Seconds to Replace a Proximity Sensor with the "e-jig" (Mounting Sleeve).
Cables with enhanced oil resistance.
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
July 26, 2022
Configuring Analog Expansion Units for CP1 series PLC
Introduction This article covers how to set up the analog expansion modules for the CP series PLCs. Step 1 Wire the analog inputs/outputs. See Appendix E. Step 2 Determine the range codes required for your application. See the below example for deter
May 03, 2022
How to setup NX-EIC202 coupler with CJ Series PLC
Scenario You would like to add a NX-EIC202 Coupler to your Network with a CJ Series PLC Solution When it comes to setting up the NX-EIC202 Coupler , there are 3 parts to the setup process: Part 1 - Unit IP Address Setup There are several ways to se
April 06, 2022
Citect to OMRON PLC Serial Setup Guide
Step by step guide to implement serial communications