CJ Motion/Position Control Units
CJ Motion/Position Control Units
Counter Units gather position information from SSI- or incremental encoders. Actual positions are compared with internally stored target values.
CJ2M CPU Units have dedicated positioning functions that can be used by installing up to 2 Pulse I/O option modules.
Position- and Motion Control Units equipped with MECHATROLINK-II interface can control multiple drives through a single high-speed link. Message routing through multiple communication layers allows the attached drives to be configured from any point in the control network.
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Show
- 10
- 20
- 30
- 50
Sort by
- Relevance
- Price (low-high)
- Price (high-low)
- Alphabetical (A-Z)
- Alphabetical (Z-A)
Accessories
Accessories
There are accessories in this series
Show
- 10
- 20
- 30
- 50
Sort by
- Relevance
- Price (low-high)
- Price (high-low)
- Alphabetical (A-Z)
- Alphabetical (Z-A)
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
August 24, 2023
What to look for in AMR Debug Logs
Discover what key information to look for when debugging AMR systems, and how to interpret the results.
November 28, 2023
CP and NJ FINS TCP Sample Code
Most models of OMRON PLC support FINS commands, which can allow you to transmit data from one PLC to another. These commands are cross platform compatible, so a CP series PLC can communicate to an NJ series PLC via FINS. The SEND(Send) command allows
February 19, 2024
F3SG Safety Light Curtain Pre-Reset Function
Introduction This guide illustrates how to enable and use the Pre-Reset function of an F3SG Safety Light Curtain. The Pre-Reset function adds an additional step to the process of removing a stop condition, which allows for increased safety for situat
February 19, 2024
Connecting a CP1L/H PLC to an NB HMI using a CP1W-EIP61 Option Board
Introduction This guide will show the process of connecting a CP1L or CP1H PLC to an NB HMI using a CP1W-EIP61 option board. Normally the connection of a CP1L or CP1H to an HMI is documented assuming the use of an NS HMI, or a CP1W-CIF41 option board