1S Drives
1S Drives
23-bit resolution encoder
Fast and secure screw-less push-in in all connectors
Pluggable connectors for easy pre-wiring and system maintenance
Direct wiring of I/O signals
Embedded relay for direct motor brake control
Improved loop control for overshoot and quick setting time
Safety function built-in: Network Safe Torque Off: PLd (EN ISO 13849-1), SIL2 (IEC 61508)
Hardwired Safe Torque Off: PLe (EN ISO 13849-1), SIL3 (IEC 61508)
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Show
- 10
- 20
- 30
- 50
Sort by
- Relevance
- Price (low-high)
- Price (high-low)
- Alphabetical (A-Z)
- Alphabetical (Z-A)
Accessories
Accessories
There are accessories in this series
Show
- 10
- 20
- 30
- 50
Sort by
- Relevance
- Price (low-high)
- Price (high-low)
- Alphabetical (A-Z)
- Alphabetical (Z-A)
Downloads
Downloads
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
January 31, 2022
Where can I download Sysmac Libraries?
OMRON Sysmac Studio uses libraries to add functionality to the controller. This is done by using Sysmac Reusable Libraries (.slr files). Official Libraries While the user can create their own library, OMRON has an official set of Library files loca
August 07, 2023
Using CP1 Modbus Control For MX2 Inverter Drives
Introduction This document describes the procedure to configure and connect a CP1L-M30 PLC to an MX2 inverter drive for simple motion control using Modbus RTU. This example is intended for a new CP1/MX2 user and illustrates easy programming and confi
February 10, 2023
Using CP1[] Modbus Control For RX2 Inverter Drives
Introduction This document describes the procedure to configure and connect a CP1[] series PLC to an RX2 inverter drive for simple motion control using Modbus RTU. This example is intended for a new CP1/RX2 user and illustrates easy programming and c
January 16, 2023
1S Servo - Using an external brake relay
Why use an external brake relay? The 1S Servo brake relay lifetime is 32,000 cycles before the Brake Interlock Output Relay Lifetime Warning is generated and an alarm occurs in the drive. Using an external relay will allow easy replacement of the swi