NX-EIC202
NX-EIC202
More models in this seriesNX-series EtherNet/IP Coupler, 2 ports, supports local safety, 63 I/O units, max I/O current 10 A, screwless push-in connector, delivered with end cover
Stock Availability
View More
View Less
| Quantity | Availability |
|---|---|
| Available immediately as of 05/11/2024 | |
Please note that the quantities shown are indicative only and are not guaranteed.
We are unable to obtain real time stock information for this product. Click here to contact sales directly.
Please note that the quantities shown are indicative only and are not guaranteed. Click here to contact sales directly.
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Product Description
NX-series EtherNet/IP Coupler, 2 ports, supports local safety, 63 I/O units, max I/O current 10 A, screwless push-in connector, delivered with end cover
SKU: NX020178FSpecifications
Accessories
Accessories
There are accessories in this model
Downloads
Downloads
Enquire
Enquire
Articles for this model
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
August 10, 2023
Configure Omron NX‐EIC202 EtherNet/IP Coupler for Use with Rockwell Automation PLCs
1 Introduction This article shows the basic steps for configuration of a Rockwell Automation PLC to connect to the OMRON NX‐EIC202 EtherNet/IP coupler. The guide will assume the hardware installation has already been completed following [W536]. T
February 13, 2023
Ethernet/IP Setup Guide Using Sysmac
Introduction The purpose of this document is to demonstrate the process of setting up an Ethernet/IP network using Sysmac. Info The Devices used in this example have been pre-allocated two IP address. This example does not go through the configurat
May 03, 2022
How to setup NX-EIC202 coupler with CJ Series PLC
Scenario You would like to add a NX-EIC202 Coupler to your Network with a CJ Series PLC Solution When it comes to setting up the NX-EIC202 Coupler , there are 3 parts to the setup process: Part 1 - Unit IP Address Setup There are several ways to se
August 03, 2023
Does the NX-EIC202 support Device Level Ring (DLR)
The NX-EIC202 does not support the DLR protocol and is also a non compliant device which means that it cannot be used as part of a DLR network as a non-DLR device. The NX-EIC does not support a few key features such as QoS, forced setting of speed/