CS1W-SCU21-V1
CS1W-SCU21-V1
More models in this seriesSerial communications unit, 2 x RS-232C ports, Protocol Macro, Host Link, 1:N NT Link, No protocol, Serial Gateway (CompoWay/F, Modbus-RTU, Modbus-ASCII, Host Link), Modbus RTU Slave
Stock Availability
View More
View Less
Quantity | Availability |
---|---|
Available immediately as of 06/09/2024 | |
Please note that the quantities shown are indicative only and are not guaranteed.
We are unable to obtain real time stock information for this product. Click here to contact sales directly.
Please note that the quantities shown are indicative only and are not guaranteed. Click here to contact sales directly.
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Product Description
Serial communications unit, 2 x RS-232C ports, Protocol Macro, Host Link, 1:N NT Link, No protocol, Serial Gateway (CompoWay/F, Modbus-RTU, Modbus-ASCII, Host Link), Modbus RTU Slave
SKU: CS1W0383ASpecifications
Accessories
Accessories
There are accessories in this model
Downloads
Downloads
Enquire
Enquire
Articles for this model
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
February 10, 2023
Using CP1[] Modbus Control For RX2 Inverter Drives
Introduction This document describes the procedure to configure and connect a CP1[] series PLC to an RX2 inverter drive for simple motion control using Modbus RTU. This example is intended for a new CP1/RX2 user and illustrates easy programming and c
January 31, 2022
PC to C-Series PLC cable
Cable for programming and communication to a C-Series PLC OMRON Australia and New Zealand sell a prefabricated cable for connection of RS-232 between a C-Series PLC and a PC. This cable will suit PLCs such as CP1L and CP1L-E, CP1E, CP2E, CP1H, CJ-ser
March 06, 2023
Connecting your NA5 HMI to a CS1G/H PLC
Introduction The purpose of this article is to demonstrate the connection procedure between an NA5 HMI and a CS1G/H PLC, using a CS1W-ETN11 or CS1W-ETN21 ethernet unit. Pre-Requisites This article assumes prior basic knowledge of both Sysmac Studio a