With an NA Series HMI, you can perform project downloads with via an external storage media if unable to do so from Sysmac. The procedure is as outlined below:
- Insert the SD Card or USB into the computer
- From the Sysmac Toolbar, select "HMI → Synchronization→Media Device"
- Select the desired file and select “OK”
- The project in Sysmac is then compared to the project stored on the storage media and the usual Synch. window is dispalyed.
- Select “Transfer to Media Device” at the bottom of the window
- Insert the media device to the HMI and open the System Menu, select “Transfer Operations”
- Select “Transfer User Program to HMI”
- Finally select the desired program and select “Transfer to HMI”
