Sigma-5 Drives
Sigma-5 Drives
Analogue/ Pulse and MECHATROLINK-II servo drives models. EtherCAT available as option unit
Support for direct drive servo motors, linear servo motors and linear axes
Advance autotuning function
Enhanced vibration supression function
Integrated safety stop function
Frequency response of 1.6 kHz
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
There are no associated downloads with this model.
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
January 31, 2022
Where can I download Sysmac Libraries?
OMRON Sysmac Studio uses libraries to add functionality to the controller. This is done by using Sysmac Reusable Libraries (.slr files). Official Libraries While the user can create their own library, OMRON has an official set of Library files loca
August 07, 2023
Using CP1 Modbus Control For MX2 Inverter Drives
Introduction This document describes the procedure to configure and connect a CP1L-M30 PLC to an MX2 inverter drive for simple motion control using Modbus RTU. This example is intended for a new CP1/MX2 user and illustrates easy programming and confi
February 10, 2023
Using CP1[] Modbus Control For RX2 Inverter Drives
Introduction This document describes the procedure to configure and connect a CP1[] series PLC to an RX2 inverter drive for simple motion control using Modbus RTU. This example is intended for a new CP1/RX2 user and illustrates easy programming and c
January 16, 2023
1S Servo - Using an external brake relay
Why use an external brake relay? The 1S Servo brake relay lifetime is 32,000 cycles before the Brake Interlock Output Relay Lifetime Warning is generated and an alarm occurs in the drive. Using an external relay will allow easy replacement of the swi