EJ1N-HFU-ETN
EJ1N-HFU-ETN
Connects Modbus serial slaves to PROFINET and Modbus/TCP.
Built for integration into the CelciuX° (EJ1).
Usable as a gateway for discrete units like E5_N-series temperature controllers and MX2 inverters.
Flexible implementation with standard .gsd file.
Ethernet/IP gateway just for EJ1N-TC2 cards: up to 24 EJ1N-TC2 connectable (48 loops in total).
Local Stock Centre
Call Our Local Support Team
Fast and Trackable Delivery
Models
Models
There are models in this series
Accessories
Accessories
There are accessories in this series
Downloads
Downloads
There are no associated downloads with this model.
Enquire
Enquire
Articles for this series
You can find articles written by our team here to help you on your journey with us. They contain useful tips, startup guides and best practice configuration for our products.
July 29, 2022
How to Setup your CS/CJ-ETN21 Communication Unit
Introduction This guide is a step-by-step guide to walk you through connecting your CS or CJ ETN21 Ethernet Communication Unit to your PLC and enabling it to communicate over an ethernet network. Pre-Requisites Basic knowledge of CX-Programmer. Basic
May 16, 2022
Selection Guide for OMRON PLCs
PLC Selection Guide Flowchart Decision Tree Am I controlling robots? Yes No Add Button NJR PLCs. Do I require more than 60 I/O points including analog I/O? Yes No Add Button Do I need remote I/O? Yes No Add Button Do I need advanced functionalities s
May 03, 2022
CX-Thermo doesn't connect to my Temperature Controller
Scenario CX-Thermo cannot connect to your OMRON temperature controller. It's likely that the temperature controller can be seen through CX-Thermo, but a proper connection cannot be established. Issue Older versions of CX-Thermo have limited compatibi
April 06, 2022
Citect to OMRON PLC Serial Setup Guide
Step by step guide to implement serial communications